Unit installation

17

Display example when auto mode is set to ON
If AUTO MODE DISP C/H is ON (see 4.4.3), it takes about 10 seconds before the
display is switched from one mode to another.

Screen display
when auto mode is set to ON
(1) Press the
ON/OFF
button.
The ON lamp lights up and operating contents are displayed on the LCD.
(2) Press the
MODE
button.
Each time the
MODE
button is pressed, the operation mode switches from one to another. “AUTO” is also displayed.
*1: If the remote controller is connected with the unit for cool operation only, “AUTO” and “HEAT” will not be displayed, nor
will it be possible to select them.

Screen display
when auto mode is set to OFF
(1) Press the
ON/OFF
button.
The ON lamp lights up and operating contents are displayed on the LCD.
(2) Press the
MODE
button.
Each time the
MODE
button is pressed, the operation mode switches from one to another, but “AUTO” is not displayed.
*1: If the remote controller is connected with the unit for cool operation only, “HEAT” will not be displayed.
COOL DRY FAN HEAT
*1
COOL DRY FAN HEAT
*1
AUTO
*1