Technical information

The Importance
of Control
Page 266
The need for control is paramount in order to optimise the performance
of any air conditioning system and minimise its running costs and the
emissions generated. Mitsubishi Electric offer a wide range of control
options designed to do just this.
Operating an air conditioning system without the right control
can prove costly. It’s therefore important to ensure that every
system is correctly specified to the degree of control it
requires. Mitsubishi Electric have a wide range of controls
available ‘off-the-shelf’ and where needed, individual control
systems can be specifically designed to suit.
Good controls will benefit any application, large or small.
Air conditioning products need to react to a variety of factors:
different room sizes, usage and staff levels, changes in the
climate, electronic equipment and lighting etc.
The ability to monitor the energy consumption and operation
of systems is also vital. It is often said that you cannot manage
what you are not measuring. Our control systems will enable
simple measuring and monitoring of energy consumption and
running costs to ensure operation is maintained.
So whatever the application, optimum control of air conditioning
systems is essential and will result in a constant, comfortable
environment, which in turn is both energy and cost efficient.
A Degree of Difference
When an air conditioning system is not properly controlled, it
will not run as efficiently as it should. For every degree that the
system deviates from the required temperature, energy costs
can rise by up to 5%. Specify one of the many control options
from Mitsubishi Electric to ensure air conditioning works as
intended, whilst giving the optimum amount of control.
The Simpler the Better
With the array of comprehensive control systems available
from Mitsubishi Electric, it becomes simple to design and install
air conditioning systems. From a simple hand held
controller to
an AG150 system - you are in control.
Controlled
Performance
Page 267
In accordance with the requirements of
Part L2 in the Building Regulations, our control
systems provide the optimum control available,
combined with the most efficient
use of energy.