Operation Manual

Replacement of light bulbs
Vehicle care and maintenance 9-37
9
2. Turn the socket (A) counterclockwise to
remove it, and then pull the bulb out of
the socket.
3. To install the bulb, perform the removal
steps in reverse.
N00944000360
1. When removing the light unit (A), push it
toward the left side of the vehicle body.
2. Use a screw driver to gently pry up the tab
(B) and remove the lens.
3. Pull the bulb out of the socket.
4. To install the bulb, perform the removal
steps in reverse.
NOTE
 When installing the light unit, first insert the
notch (B) into the hole on the body, and then
push on the light unit to fit it into place.
License plate lights
NOTE
 Wrap a cloth around the tip of the screw-
driver to keep from scratching the lens.
NOTE
 When mounting the light unit, insert tab (C)
first then align tab (D) with its hole.
BK0223400US.book 37 ページ ２０１５年２月１３日 金曜日 午後１２時１５分