Operation Manual

Forward Collision Mitigation System (FCM) (if so equipped)
5-114 Features and controls
5
N00577800045
This switch is used to turn on or off the FCM
and also to select the distance which will trig-
ger the forward collision warning function.
• When there is a road side object (B) that
reflects the radar sensor signal, such as a
road sign.
• When approaching a gate, a railroad
crossing, an underpass, a narrow bridge,
manhole lid or a speed bump.
• When driving under an overpass or
pedestrian bridge.
• When driving in a narrow tunnel.
• When driving in a parking structure.
• When approaching a slope where the
incline changes significantly.
• When trying to stop your vehicle very
close to a vehicle or an object in front.
• When passing a vehicle or an object
closely.
WARNING
• When a vehicle in the next lane becomes
positioned directly in front of your vehi-
cle due to winding road conditions.
 The FCM should be tuned off if any of fol-
lowing situations occur:
• When the tires are not properly inflated.
• When the emergency spare tire is used.
• When your vehicle is towed or your vehi-
cle tows another vehicle.
• When your vehicle is carried on a truck.
• When your vehicle is on a chassis dyna-
mometer or free rollers.
• When the area where the radar sensor is
installed has been damaged or deformed.
CAUTION
 To maintain proper performance of the FCM;
• Always clean the surface of the radar sen-
sor.
• Avoid impacting the radar sensor or its sur-
rounding area.
• Do not put a sticker on the radar sensor or
its surrounding area.
• Do not paint the radar sensor.
WARNING
• Do not install a grill guard.
• Do not modify the radar sensor or its sur-
rounding area.
• Always use tires of the same size, same
type and same brand, and which have no
significant wear differences.
• Do not modify the vehicle’s suspensions.
FCM ON/OFF switch
CAUTION
BK0223400US.book 114 ページ ２０１５年２月１３日 金曜日 午後１２時１５分