Operation Manual

Child restraint systems
Seat and restraint systems 4-29
4
N00418901201
Your vehicle has 3 attachment points on the
backside of the second row seats. These are
for securing a child restraint system tether
strap to each of the 3 rear seating positions in
your vehicle.
N00419000198
N00419101271
1. In order to securely fasten the tether strap,
remove the head restraint from the loca-
tion where you wish to install the child
restraint system.
2. Open the gap a little between the seat
cushion (A) and the seatback (B) with
your hand to locate the lower anchors (C).
3. For easier access, the seatback may be
recline rearward.
Push the anchor connectors (D) on the
child restraint system into the lower
anchors (C) in accordance with the
instructions provided by the child restraint
system’s manufacturer.
After it is security fastened, adjust the
seatback to 4 steps forward from most
reclined position.
Remember, the lower anchors (C) pro-
vided with your vehicle are designed to
secure suitable child restraint systems
compatible with the LATCH system in
the outboard positions of the second
row seats only. The anchor connectors
are NOT designed to secure a suitable
child restraint system in the middle
seating position of the second row seat.
Tether anchor locations Examples of child restraint sys-
tems compatible with the LATCH
system
A- Rear-facing child restraint system
B- Front-facing child restraint system
C- Child restraint system lower anchor
connectors
D- Tether strap
(These are only examples.)
Using the LATCH system
A- Vehicle seat cushion
B- Vehicle seatback
C- Lower anchor
BK0211800US.book 29 ページ ２０１４年３月１２日 水曜日 午後２時４２分