Operation Manual

Seat belts
4-20 Seat and restraint systems
4
5. To release the belt, press the button on the
buckle and allow the belt to retract.
If the belt does not retract smoothly, pull it
out and check for kinks or twists in the
webbing. Then make sure it remains
untwisted as it retracts.
N00409900022
The center seat belt for the second row can be
detached to fold the left side second row seat.
This seat belt must be worn correctly as illus-
trated.
1. Pull out the detachable anchor plate (C)
from the storage pocket on seat back
cushion.
2. Pull the small latch plate (A) slowly and
insert it into the detachable anchor plate
until a click is heard. Make sure that the
seat belt is not twisted.
NOTE
 With the exception of the seat belt for the
driver, the seat belts in all other seating posi-
tions are equipped with an Automatic Lock-
ing Retractor (ALR) function. If you pull the
seat belt fully out of the retractor, the retrac-
tor will switch to its ALR child restraint
installation function (see page 4-30).
When the ALR function has been activated,
the seat belt will only retract. If this happens,
let the belt fully retract, then pull the seat
belt back out, repeating steps 1 through 4.
WARNING
 Be sure the lap belt portion fits snugly and
is worn as low as possible across the hips,
not around the waist. Failure to follow this
instruction will increase the risk of serious
injury or death in the event of an accident.
 Be sure the seat belt webbing is not
twisted when worn. Twisted webbing may
adversely affect seat belt performance.
Detachable center seat belt for
second row
WARNING
WARNING
 Never detach the center seat belt except
when the left side seat back in the second
row is folded. Using the center seat belt
with the detachable anchor unlatched
increases the risk of serious injury or
death in an accident. Make sure the small
latch plate (A) is properly latched to the
detachable anchor before the center seat
belt is used.
To attach
NOTE
 If the seat belt locks up and cannot be pulled
out, pull it once with force and let it retract
all the way.
Then, pull the belt out slowly once again.
 The seat belt can be buckled up by inserting
the latch plate (B) into the buckle (D) like
other seat belts.
BK0211800US.book 20 ページ ２０１４年３月１２日 水曜日 午後２時４２分