Operation Manual

Making a cargo area
Seat and restraint systems 4-15
4
5. Push down the seat cushion until it locks
into place.
6. Make sure that all seat belt buckles are
properly positioned on the seat cushion.
Install the head restraints and make sure
that they are securely locked.
7. If the center seat belt is stored;
• Pull out the detachable anchor plate (D)
from the seatback.
• Pull the small latch plate (E) slowly and
insert it into the detachable anchor plate
until a click is heard.
• Make sure that the seat belt is not
twisted.
For details, refer to “Datachable center
seat belt for second row” on 4-20.
N00409800021
1. Remove the head restraints from the third
row seats. (Refer to “Head restraints” on
page 4-10.)
2. Pull up the strap (A), then fold the seat-
back forward.
NOTE
 A rubber strap (C) is attached to the seat belt
buckle for the left outboard seating position.
This helps raise the seat belt buckle while the
seat cushion returns to the original position.
Folding the third row seats
(Seating 7 passengers)
To fold
BK0211800US.book 15 ページ ２０１４年３月１２日 水曜日 午後２時４２分