Operation Manual

Replacement of light bulbs
9-38 Vehicle care and maintenance
9
N00944000360
1. When removing the light unit (A), push it
toward the left side of the vehicle body.
2. Use a screw driver to gently pry up the tab
(B) and remove the lens.
3. Pull the bulb out of the socket.
4. To install the bulb, perform the removal
steps in reverse.
N00943900102
License plate lights
NOTE
 Wrap a cloth around the tip of the screw-
driver to keep from scratching the lens.
NOTE
 When mounting the light unit, insert tab (C)
first then align tab (D) with its hole.
High-mounted stop light
NOTE
 The high-mounted stop light uses an LED
instead of the bulb. Check with an authorized
Mitsubishi Motors dealer or a repair facility
of your choice when the light needs to be
repaired or replaced.
BK0211800US.book 38 ページ ２０１４年３月１２日 水曜日 午後２時４２分