Operation Manual

Replacement of light bulbs
9-36 Vehicle care and maintenance
9
2. Remove the 3 screws (B) and remove the
light unit.
3. Turn the socket counterclockwise to
remove it.
4. While holding down the tab (F), pull out
the bulb (G).
5. To install the bulb, perform the removal
steps in reverse.
N00943701543
1. Open the liftgate.
2. Remove the screws (A), and then move
the light unit toward the rear of the vehi-
cle to unfix the notch (B) and pins (C).
NOTE
 When unfastening the screws or the fog
light, be careful not to move the beam posi-
tion adjustment screw (C).
D- Front fog light
E- Daytime running light
Type 1
Type 2
Type 3
Rear combination lights
Front fog light Daytime running light
BK0211800US.book 36 ページ ２０１４年３月１２日 水曜日 午後２時４２分