Operation Manual

Making a cargo area
4-14 Seat and restraint systems
4
7. Pull up the lever (C), then fold the seat-
back forward.
8. Put the head restraint on the hook (D)
with their front faces facing upward until
it locks into place.
1. Remove the head restraint from the hook.
2. Raise the seatback until it locks securely
into place.
3. On vehicles with the third row seats,
make sure that the lever is in the walk-in
mode position.
Otherwise, move the lever to the walk-in
mode position.
4. While lifting the seat belt buckle (A), gen-
tly lower the seat cushion. Make sure that
there is a hook (B) at the position shown
in the illustration.
CAUTION
 Do not allow any person to get on the plastic
cover (B), and do not place luggage on it.
Doing so could damage the plastic cover.
CAUTION
 Do not allow any person to sit on the flipped
seat cushion, and do not place luggage on it.
The seat’s mounting fittings could bend
under the weight, making it impossible for
the seat cushion to be secured when it returns
to the original position.
NOTE
 When folding the second row seatback for-
ward once, the seat will automatically switch
from the luggage area mode to the walk-in
mode.
To return
BK0211800US.book 14 ページ ２０１４年３月１２日 水曜日 午後２時４２分