Operation Manual
Making a cargo area
Seat and restraint systems 4-13
4
N00405701120
The second row seat can be folded to create
an additional cargo area.
1. Remove the head restraints from the sec-
ond row outside seating position.
Lower the head restraint for second row
middle seating position to its lowest posi-
tion.
Refer to “Head restraints” on page 4-10.
2. When the left side second row seat is
folded, store the seat belt for the middle
seating position of the second row seat.
Refer to “Detachable center seat belt for
second row” on page 4-20.
3. On vehicles with the second row seat slide
function, move the second row seat fully
backward.
Refer to “To adjust the seat forward or
backward” on page 4-8.
4. Lift the front end of the seat cushion.
5. Flip the seat cushion forward. On vehicles
with the third row seats, move the lever
(A) to the luggage area mode position.
6. Fold forward the seat belt buckle.
When driving the vehicle, do not allow
anyone to sit on the third row seat if the
second row seat is in the folded position.
CAUTION
In the cargo area, do not load the luggage
higher than the top of the seats and make
sure that the luggage is firmly secured.
Restricted rear vision or flying objects enter-
ing the passenger compartment during sud-
den braking could result in a serious accident
and/or injury.
Seats should always be operated by an adult.
Seat adjustments by a child could lead to an
unexpected accident.
When adjusting the seats, be careful not to
catch your hand or leg. Personal injury could
result.
NOTE
When the seatback of a front seat is reclined,
return it to the upright position before driv-
ing.
Folding the second row seats
WARNING
NOTE
You can separately fold the right and left side
of the second row seat.
To fold the second row seat
NOTE
If you do not move the second row seat fully
backward, you may not be able to fold the
second row seat.
BK0211800US.book 13 ページ 2014年3月12日 水曜日 午後2時42分