Operation Manual

Automatic transaxle fluid (if so equipped)
9-10 Vehicle care and maintenance
9
4. Replacing the air cleaner filter and put the
cover back on in its original position.
5. For 2.4 L models, put the duct back on in
its original position.
N00938000570
The automatic transaxle should be maintained
and serviced by an authorized Mitsubishi
Motors dealer or a repair facility of your
choice to obtain the best performance and
longest life. It is important that the transaxle
fluid is kept at the correct level.
The fluid level should be checked when the
bar graph for the engine coolant temperature
display on the multi-information display
shows the engine is warmed up and the fluid
in the transaxle is heated to its normal work-
ing temperature. Driving with the wrong fluid
level will rapidly wear out the transaxle and
destroy the fluid.
NOTE
 Mitsubishi Motors Genuine Parts are recom-
mended when replacing the air cleaner filter.
 For 2.4 L models, make sure that the connec-
tor is properly reconnected.
2.4 L models
3.0 L models
 After replacing the air cleaner filter, make
sure that the hinges at the bottom of cover
are firmly set.
CAUTION
 Take care not to scratch the engine air flow
sensor when removing the air cleaner cover.
NOTE
2.4 L models
3.0 L models
Automatic transaxle fluid (if
so equipped)
To check the fluid level
BK0211800US.book 10 ページ ２０１４年３月１２日 水曜日 午後２時４２分