Operation Manual

Automatic climate control air conditioner
Comfort controls 7-13
7
N00732401476
To remove frost or mist from the windshield
and door windows, use the MODE switch or
defogger switch (“ ” or “ ”).
Use this setting to keep the windshield and
door windows clear of mist, and to keep the
leg area heated (when driving in rain or
snow).
1. Set the air selection switch to the outside
position.
2. Set the MODE switch to the “ ” posi-
tion.
3. Select your desired blower speed by
pressing the blower speed selection
switch.
4. Select your desired temperature by press-
ing the temperature control switch.
5. Push the air conditioning switch.
1. Push the defogger switch to change to the
“ ” position.
2. Set the blower to the maximum speed.
3. Set the temperature to the highest posi-
tion.
Defrosting or defogging (wind-
shield, door windows)
CAUTION
 For safety, make sure you have a clear view
through all the windows.
 For ordinary defrosting
Type 1
Type 2
 For quick defrosting
NOTE
 While the mode selection is set to “ ”
position, the air conditioning compressor
will run automatically. The outside air posi-
tion will also be selected automatically.
 If the mode selection is set to “ ” position,
you cannot turn the air conditioner off or
select the recirculation position. This pre-
vents the windows from fogging up.
Type 1
Type 2
BK0211800US.book 13 ページ ２０１４年３月１２日 水曜日 午後２時４２分