Operation Manual

Automatic climate control air conditioner
Comfort controls 7-9
7
N00737101218
To change the amount of air flowing from the
vents, press the MODE switch. Each time the
MODE switch is pressed, the mode changes
to the next one in the following sequence:
“”  “”  “”  “”  “”.
The selected mode is shown in the display
(A). Refer to “Changing the mode selection”
on page 7-3.
N00703401025
When this switch is pressed, the mode
changes to the “ ” mode. The indicator
light (A) will come on. The selected mode is
shown in the display (B). Refer to “Changing
the mode selection” on page 7-3.
N00737201378
Normally, use the outside air position to keep
the windshield and side windows clear and to
quickly remove fog or frost from the wind-
shield.
To change the air selection, simply press the
air selection switch.
 Outside air {Indicator light (A) OFF}
Outside air is introduced into the passen-
ger compartment.
 Recirculated air {Indicator light (A) ON}
Air is recirculated inside the passenger
compartment.
When the air conditioning turns on, the air
selection is controlled automatically. When
the air conditioning turns off, the air selection
Mode switch Defogger switch
NOTE
 When the defogger switch is pressed, the air
conditioning system automatically operates
and outside air (as opposed to recirculated
air) is selected. This automatic switching
control is carried out to prevent misting of
the windows even if “Disable automatic air
conditioning control” or “Disable automatic
air control” is set. Refer to “Personalizing
the air conditioning switch (Changing the
function setting)” on page 7-11, “Personaliz-
ing the air selection (Changing the function
setting)” on page 7-10.
Air selection switch
BK0211800US.book 9 ページ ２０１４年３月１２日 水曜日 午後２時４２分