Operation Manual

Automatic climate control air conditioner
Comfort controls 7-7
7
N00736901189
Press of the blower speed selection
switch to increase the blower speed.
Press of the blower speed selection
switch to decrease the blower speed.
The selected blower speed will be shown in
the display (A).
N00737001334
Press or of the temperature control
switch to the desired temperature.
The selected temperature will be shown in the
display (A).
NOTE
 Since the air conditioning operation is con-
trolled while the ECO mode is operating,
you may feel that effectiveness of the air
conditioner is insufficient.
 ECO mode switch P.5-177
 Even during ECO mode operation, you can
select normal operation of the air condi-
tioner.
On vehicles equipped with Mitsubishi Multi-
Communication System, screen operations
can be used to change the setting. Refer to
the separate owner’s manual for details.
 In extreme cold, the air conditioning control
panel screen may operate sluggishly. This
does not indicate a problem.
It will disappear when the vehicle interior
temperature rises to a normal temperature.
 A sound will be made every time you push
all the switches.
Blower speed selection switch
1- Increase
2- Decrease
Type 1
Type 2
Temperature control switch
NOTE
 The temperature value of air conditioner is
switched in conjunction with outside temper-
ature display unit of the multi information
display.
On vehicles equipped with multi information
display - Type 1, refer to “Changing the tem-
perature unit” on page 5-136.
On vehicles equipped with multi information
display - Type 2, refer to “Changing the tem-
perature unit” on page 5-147.
BK0211800US.book 7 ページ ２０１４年３月１２日 水曜日 午後２時４２分