Operation Manual

Trailer towing
6-16 Driving safety
6
3. When the chocks or blocks are in place,
release your brakes slowly until the
chocks or blocks absorb the load.
4. Apply the parking brake firmly.
5. Set the selector lever to the “P” (PARK)
position and turn off the engine.
When restarting out after parking on a hill:
1. Check that the selector lever is set to the
“P” (PARK) position.
2. Start the engine. Be sure to keep the brake
pedal depressed.
3. Set the selector lever to the “D” (DRIVE)
position or “R” (REVERSE) position.
4. Release the parking brake and brake pedal
and slowly pull or back away from the
chocks or blocks. Stop and apply your
brakes.
5. Have someone retrieve the chocks or
blocks.
BK0211800US.book 16 ページ ２０１４年３月１２日 水曜日 午後２時４２分