Operation Manual

Cargo area cover (if so equipped)
Features and controls 5-219
5
There are 2 installation holes (B) for the
cargo area cover.
1. Move one of the sliders (C) toward the
inside of the vehicle, and fit the protrud-
ing portion (D) into the installation hole
that is to be used. Move the opposite
slider in the same fashion.
2. After changing the position, gently shake
the entire cargo area cover to make sure it
is securely retained.
1. Roll back the cargo area cover.
2. Move one of the sliders (C) toward the
inside of the vehicle and lift it to remove
the cargo area cover.
To refit the cargo area cover, follow the
removal steps in reverse. Gently shake the
entire cargo area cover after fitting it to make
sure it is securely retained.
To change position
NOTE
 If the second row seat touches the cargo area
cover, move the cargo area cover rearward.
The cargo area cover could be damaged if it
supports the seatback of the second row
seats.
To remove
To refit
BK0211800US.book 219 ページ ２０１４年３月１２日 水曜日 午後２時４２分