Operation Manual

USB input terminal (if so equipped)
Features and controls 5-207
5
N00566901102
1. Park your vehicle in a safe place and turn
the ignition switch to the “LOCK” posi-
tion or put the operation mode in OFF.
2. Open the USB input terminal cover (A) in
the floor console box.
3. Connect the Dock connector (C) to the
iPod (B).
4. Connect the Dock connector (C) to the
USB input terminal (D).
5. To remove the Dock connector, turn the
ignition switch to the “LOCK” position or
put the operation mode in OFF first and
perform the installation steps in reverse.
N00567001041
For details about the types of connectable
devices and supported file specifications,
refer to the following pages and manuals.
[For vehicles equipped with the AM/FM
radio/CD player]
Refer to “Listen to an iPod” on page 7-33,
“Listen to Audio Files on a USB Device” on
page 7-35 and “Audio Files
(MP3/WMA/AAC)” on page 7-20.
[For vehicles equipped with the Mitsubishi
Multi-Communication System (MMCS)]
Refer to the separate owner’s manual.
[For vehicles equipped with the DISPLAY
AUDIO]
Refer to the separate owner’s manual.
How to connect an iPod
NOTE
 Use a genuine Dock connector from Apple
Inc.
CAUTION
 Keep the lid of the floor console box closed
while driving the vehicle. A lid or the con-
tents of the floor console box could other-
wise cause injuries.
NOTE
 When closing the floor console box, be care-
ful not to trap the connector cable.
Types of connectable devices
and supported file specifica-
tions
Except for vehicles equipped with the
Bluetooth
®
2.0 interface
BK0211800US.book 207 ページ ２０１４年３月１２日 水曜日 午後２時４２分