Operation Manual

Bluetooth® 2.0 interface (if so equipped)
5-204 Features and controls
5
The Bluetooth
®
2.0 interface automatically
converts from text to voice the names regis-
tered in the transferred phonebook entries,
and creates names.
Follow the steps below to transfer to the
mobile phonebook the phonebook stored in
the cellular phone.
1. Press the SPEECH button (except for
vehicles with Mitsubishi Multi-Commu-
nication System) or PICK-UP button (for
vehicles with Mitsubishi Multi-Commu-
nication System).
2. Say “Phonebook.”
3. The voice guide will say “Select one of
the following: new entry, edit number,
edit name, list names, delete, erase all, or
import contact.” Say “Import contact.”
4. The voice guide will say “Would you like
to import a single entry or all contacts?”
Say “All contacts.”
5. The voice guide will say “Importing the
contact list from the mobile phonebook.
This may take several minutes to com-
plete. Would you like to continue?”
Answer “Yes,” transferring to the mobile
phonebook the phonebook stored in the
cellular phone will start.
Answer “No,” the system will return to
the main menu.
NOTE
 Only the mobile phonebook transferred from
the connected cellular phone can be used
with that cellular phone.
 You cannot change the names and telephone
numbers in the phonebook entries registered
in the mobile phonebook. You cannot select
and delete specific phonebook entries, either.
To change or delete any of the above, change
the applicable information in the source
phonebook of the cellular phone and then
transfer the phonebook again.
To import a devices phonebook
NOTE
 Transfer should be completed while the vehi-
cle is parked. Before transferring, make sure
that the vehicle is parked in a safe location.
 The already stored phonebook in the mobile
phonebook is overwritten by the stored
phonebook in the cellular phone.
 All or part of data may not be transferred,
even when the cellular phone supports Blue-
tooth
®
, depending on the compatibility of
the device.
 Only a home, a work, and a mobile number
can be imported.
 The maximum supported telephone number
length is 19 digits. Any telephone number of
20 digits or more will be truncated to the first
19 digits.
 If telephone numbers contain characters
other than 0 to 9, *, # or +, these characters
are deleted before the transfer.
 For the connection settings on the cellular
phone side, refer to the instructions for the
cellular phone.
NOTE
NOTE
 The transfer may take some time to complete
depending on the number of contacts.
 If the Bluetooth
®
2.0 interface could not be
connected to the Bluetooth
®
compatible cel-
lular phone, the voice guide will say “Unable
to transfer contact list from phone” and then
the system will return to the main menu.
 If you press the HANG-UP button or press
and hold the SPEECH button during the data
transfer, the transfer will be cancelled and
the system will return to the main menu.
 If an error occurs during the data transfer, all
transfer will be cancelled and the voice guide
will say “Unable to complete the phonebook
import” and then the system will return to
the main menu.
 If there are no contacts in the phonebook, the
voice guide will say “There are no contacts
on the connected phone.”
BK0211800US.book 204 ページ ２０１４年３月１２日 水曜日 午後２時４２分