Operation Manual

Bluetooth® 2.0 interface (if so equipped)
5-196 Features and controls
5
[For vehicles equipped with the Mitsubishi
Multi-Communication System (MMCS)]
Refer to the separate owner’s manual.
[For vehicles equipped with the DISPLAY
AUDIO]
Refer to the separate owner’s manual.
N00565501097
You can make or receive hands-free calls
using a Bluetooth
®
compatible cellular phone
connected to the Bluetooth
®
2.0 interface.
You can also use the phonebooks in the Blue-
tooth
®
2.0 interface to make calls without
dialing telephone numbers.
To make a call P.5-196
Send function P.5-198
Receiving calls P.5-198
Mute function P.5-198
Switching between hands-free mode and pri-
vate mode P.5-198
N00565601098
You can make a call in the following 3 ways
using the Bluetooth
®
2.0 interface:
 By saying a telephone number
 By using the Bluetooth
®
2.0 interface’s
phonebook
 By redialing a telephone number
You can make a call by saying the telephone
number.
1. Press the SPEECH button (except for
vehicles with Mitsubishi Multi-Commu-
nication System) or PICK-UP button (for
vehicles with Mitsubishi Multi-Commu-
nication System).
2. Say “Dial.”
3. After the voice guide says “Number
please,” say the telephone number.
4. The voice guide will say “Dialing <num-
ber recognized>.”
The Bluetooth
®
2.0 interface will then
make the call.
When the confirmation function is on, the
system will confirm the telephone number
again. To continue with that number,
answer “Yes.”
To change the telephone number, answer
“No.” The system will say “Number
please” then say the telephone number
again.
You can make calls using the vehicle phone-
book or mobile phonebook of the Bluetooth
®
2.0 interface.
For details on the phonebooks, refer to
“Phonebook function” on page 5-198.
How to make or receive hands-
free calls
NOTE
 Hands-free calls may not operate correctly
when you place or receive the call directly
from your cellular phone, instead of using
the Bluetooth
®
2.0 interface.
To make a call
Making a call by using the telephone
number
NOTE
 In the case of English, the system will recog-
nise both “zero” and “oh” (Letter “o”) for the
number “0.”
 The Bluetooth
®
2.0 interface supports num-
bers (0 to 9) and characters (+, # and *).
 The maximum supported telephone number
length is as follows:
• International telephone number: + and tele-
phone numbers (to 18 digits).
• Except for international telephone number:
telephone numbers (to 19 digits).
Making a call using a phonebook
BK0211800US.book 196 ページ ２０１４年３月１２日 水曜日 午後２時４２分