Operation Manual

Bluetooth® 2.0 interface (if so equipped)
Features and controls 5-185
5
Refer to “USB input terminal” on page 5-206.
Bluetooth
®
is a registered trademark of
BLUETOOTH SIG, INC.
N00563801025
You have acquired a device that includes soft-
ware licensed to Mitsubishi Motors Corpora-
tion from JOHNSON CONTROLS Inc (the
automotive experience business unit), and
their subsequent 3rd party suppliers. For a
complete list of these 3rd party products and
their end user license agreements, please go
to the following website.
http://www.jciblueconnect.com/faq/fulldis-
closure.pdf
N00563901260
The Bluetooth
®
2.0 interface allows for mak-
ing/receiving hands-free calls in the vehicle
using a Bluetooth
®
compatible cellular
phone. It also allows the user to play music,
saved in a Bluetooth
®
music player, from the
vehicle’s speakers.
The system is equipped with a voice recogni-
tion function, which allows you to make
hands-free calls by simple switch operations
and voice command operations using a
defined voice tree.
The Bluetooth
®
2.0 interface can be used
when the ignition switch or the operation
mode is in ON or ACC.
Before you can use the Bluetooth
®
2.0 inter-
face, you must pair the Bluetooth
®
device
and Bluetooth
®
2.0 interface. Refer to “Con-
necting the Bluetooth
®
2.0 interface and
Bluetooth
®
device” on page 5-191.
Bluetooth
®
is a registered trademark of
BLUETOOTH SIG, INC.
Link System End User License
Agreement
Bluetooth
®
2.0 interface (if so
equipped)
WARNING
 Although the Bluetooth
®
2.0 interface
allows you to make hands-free calls, if you
choose to use the cellular phone while
driving, you must not allow yourself to be
distracted from the safe operation of your
vehicle. Anything, including cellular
phone usage, that distracts you from the
safe operation of your vehicle increases
your risk of an accident.
 Refer to and comply with all state and
local laws in your area regarding cellular
phone usage while driving.
NOTE
 If the ignition switch or the operation mode
is left in ACC, the accessory power will
automatically turn off after a certain period
of time and you will no longer be able to use
the Bluetooth
®
2.0 interface. The accessory
power comes on again if the ignition switch
or the engine switch is operated. Refer to
“ACC power auto-cutout function” on page
5-18 and 5-56.
 The Bluetooth
®
2.0 interface cannot be used
if the Bluetooth
®
device has a dead battery
or the device power is turned off.
 Hands-free calls will not be possible if your
phone does not have service available.
 If you place the Bluetooth
®
device in the
vehicle’s third seat or luggage compartment,
you may not be able to use the Bluetooth
®
2.0 interface.
 Some Bluetooth
®
devices are not compatible
with the Bluetooth
®
2.0 interface.
 You can confirm the Link System software
version by pressing the HANG-UP button 3
times (press and hold 2 times and then press
briefly) within 10 seconds.
BK0211800US.book 185 ページ ２０１４年３月１２日 水曜日 午後２時４２分