Operation Manual

Multi Information display - Type 1
Features and controls 5-139
5
1. Press and hold the multi information dis-
play switch (for about 2 seconds or more)
to switch from the setting mode screen to
the menu screen.
Refer to “Changing the function settings”
on page 5-134.
2. Lightly press the multi information dis-
play switch to select “ALARM” (rest time
setting).
3. Press and hold the multi information dis-
play switch (for about 2 seconds or more)
to display “ALARM” (rest time setting).
4. Lightly press the multi information dis-
play switch to select the time until the dis-
play appears.
5. Press and hold the multi information dis-
play switch (for about 2 seconds or more)
to change the setting to the selected time.
N00563501080
It is possible to change the turn signal sound.
1. Press and hold the multi information dis-
play switch (for about 2 seconds or more)
to switch from the setting mode screen to
the menu screen.
Refer to “Changing the function settings”
on page 5-134.
2. Lightly press the multi information dis-
play switch to select . (changing the
turn signal sound)
3. Press and hold the multi information dis-
play switch (for about 2 seconds or more)
to switch from 1 (turn-signal sound 1) to 2
(turn-signal sound 2), or from 2 to 1.
The setting changes to the selected turn
signal sound.
N00563601049
It is possible to change the bar graph setting
of the momentary fuel consumption display.
1. Press and hold the multi information dis-
play switch (for about 2 seconds or more)
to switch from the setting mode screen to
the menu screen.
Refer to “Changing the function settings”
on page 5-134.
2. Lightly press the multi information dis-
play switch to select . (changing
the momentary fuel consumption display)
3. Press and hold the multi information dis-
play switch (for about 2 seconds or more)
to switch from ON (with the green bar
graph) to OFF (without the green bar
graph), or from OFF to ON.
The setting changes to the selected bar
graph setting.
N00557601204
All of the function settings can be returned to
their factory settings.
1. Press and hold the multi information dis-
play switch (for about 2 seconds or more)
to switch from the setting mode screen to
the menu screen.
Refer to “Changing the function settings”
on page 5-134.
2. Lightly press the multi information dis-
play switch to select “RESET” (return to
the factory settings).
3. Press and hold the multi information dis-
play switch (for about 5 seconds or more),
the buzzer sounds and all of the function
settings are returned to the factory set-
tings.
NOTE
 If the battery is disconnected, the memory of
the unit setting is erased and is automatically
set to the “OFF”.
 The drive time is reset when the ignition
switch is in the “LOCK” or “OFF” position
or the operation mode is in OFF.
Changing the turn signal sound
Changing the momentary fuel con-
sumption display
Returning to the factory settings
NOTE
 The factory settings are as follows.
BK0211800US.book 139 ページ ２０１４年３月１２日 水曜日 午後２時４２分