Operation Manual

Multi Information display - Type 1
5-138 Features and controls
5
3. Press and hold the multi information dis-
play switch to switch from A/1 (language
cooperation: enabled) to M/2/P (language
cooperation: disabled), or from M/2/P to
A/1. The setting is changed to the selected
condition.
N00557401156
You can turn off the operation sounds of the
multi information display switch and rheostat
illumination button.
1. Press and hold the multi information dis-
play switch (for about 2 seconds or more)
to switch from the setting mode screen to
the menu screen.
Refer to “Changing the function settings”
on page 5-134.
2. Lightly press the multi information dis-
play switch to select “ ” (operation
sound setting).
3. Press and hold the multi information dis-
play switch (for about 2 seconds or more)
to switch from ON (operation sound on)
to OFF (operation sound off), or from
OFF to ON.
The setting is changed to the selected con-
dition.
N00557501160
The time until the display appears can be
changed.
NOTE
 If the battery is disconnected, the language
cooperative control is automatically set to
“A or 1” (language cooperation: enabled).
 The language cooperation setting can be
switched in the following manner.
• When “A or 1” (language cooperation:
enabled) has been selected, the language for
Mitsubishi Multi-Communication System
(if so equipped) or Bluetooth
®
2.0 interface
(if so equipped) is automatically changed to
the language selected for the multi informa-
tion display.
However, this changing function may not
work depending on the language selected
for the multi information display.
• When “M, 2 or P” (language cooperation:
disabled) has been selected, the language
for Mitsubishi Multi-Communication Sys-
tem (if so equipped) or Bluetooth
®
2.0
interface (if so equipped) is not automati-
cally changed to match the language
selected for the multi information display.
 The language on the audio system’s display
does not automatically change when you
select A or 1 (language cooperation:
enabled) in the language cooperation control.
Operation sound setting
NOTE
NOTE
 If the battery is disconnected, the memory of
the operation sound setting is erased and is
automatically set to “ON” (operation sound
on).
 The operation sound setting only deactivates
the operation sound of the multi information
display switch and rheostat illumination but-
ton. The warning display and other sounds
cannot be deactivated.
Changing the time until “REST
REMINDER” is displayed
BK0211800US.book 138 ページ ２０１４年３月１２日 水曜日 午後２時４２分