Operation Manual

Forward Collision Mitigation System (FCM) (if so equipped)
5-110 Features and controls
5
Every time the operation mode is turned to
“ON”, the FCM will automatically be turned
on.
To turn off the FCM, press and hold the FCM
switch. A buzzer will sound and the “FCM
OFF” message and indicator will appear
in the multi-information display.
To turn on the FCM again, press and hold the
FCM switch. A buzzer will sound, the “FCM
OFF” message and the indicator will go
off, and a current distance mode for the for-
ward collision warning will be shown in the
multi-information display.
The distance to the vehicle ahead which trig-
gers the forward collision warnings can be
selected from two levels, “NEAR” or “FAR”.
To change the distance mode, push the FCM
ON/OFF switch. Every time the switch is
pushed, the distance mode will be switched.
The selected distance mode is shown on the
information screen of the multi-information
display.
When “NEAR” is selected
When “FAR” is selected
When the FCM system determines that its
performance has been degraded, the forward
collision warning function and the FCM brak-
ing function will become inoperative.
This can occur when
 Foreign objects, such as dirt, snow or ice,
adhere to the surface of the radar sensor.
 In adverse weather conditions, such as
rain, snow, sand storms, etc.
 A front vehicle or an oncoming vehicle is
splashing water, snow or dirt.
 Driving on a nonbusy road with a few
vehicles and obstacles in front.
 The brake pads are overheating.
To turn on/off the FCM system
To change forward collision warn-
ing distance
NOTE
 Actual distance which triggers the forward
collision warnings will vary depending on
your vehicle speed and the front vehicle
speed. The distance will become longer
when the vehicle speeds are higher.
 The distance which will trigger the FCM
braking function cannot be adjusted.
When a problem is detected
BK0211800US.book 110 ページ ２０１４年３月１２日 水曜日 午後２時４２分