Operation Manual

Forward Collision Mitigation System (FCM) (if so equipped)
5-106 Features and controls
5
The following distance indicator shows the
level of the following distance:
“Long”
“Middle”
“Short”
N00582000029
Press and hold the “ACC ON/OFF” switch
while the operation mode is in the “ON” posi-
tion. A buzzer will sound and the multi infor-
mation display will show the following
indicator.
The conventional cruise control is turned off
when the operation mode is tuned off.
For operation of the cruise control, refer to
“Cruise control” on page 5-92.
N00582100020
FCC ID:OAYARS3-B (for vehicles sold in
the U.S.A)
IC: 4135A-ARS3B (for vehicles sold in the
Canada)
This device complies with Part 15 of FCC
Rules and Industry Canada licence-exempt
RSS standard(s).
Operation is subject to the following two con-
ditions.
 this device may not cause harmful inter-
ference.
 this device must accept any interference
received, including interference that may
cause undesired operation.
N00577300037
The Forward Collision Mitigation System
(FCM) is designed to help reduce the risk of a
collision with a vehicle straight ahead of your
vehicle. The FCM uses a radar sensor (A) to
determine the distance to a vehicle in front
and relative speed to that vehicle. The FCM is
not designed as an automatic driving system
or as a collision avoidance system.
When your vehicle is approaching a vehicle
straight ahead in your path and the FCM
To activate conventional cruise
control
NOTE
 The conventional cruise control does not
sound or display the approach alarm, will not
adjust your vehicle speed, and does not con-
trol the distance between your vehicle and a
vehicle in front.
General information
CAUTION
 Changes or modifications not expressly
approved by the manufacturer for compli-
ance could void the user’s authority to oper-
ate the equipment.
Forward Collision Mitiga-
tion System (FCM)
(if so
equipped)
BK0211800US.book 106 ページ ２０１４年３月１２日 水曜日 午後２時４２分