Operation Manual

Adaptive Cruise Control System (ACC) (if so equipped)
Features and controls 5-103
5
N00581600028
There are two ways to decrease the set speed.
The set speed will decrease by 1 mph (1
km/h) every time you push down the “SET -”
switch while the ACC is activated. If you
hold the switch pushed down, the set speed
decreases in 5 mph (5 km/h) increments.
By depressing the brake pedal while the ACC
is activated, the ACC control is canceled and
your vehicle speed will decrease.
At the point where the vehicle speed reaches
your desired speed, push down and release
the “SET -” switch; the new speed is then set
in the system.
N00582800027
Simply depress the accelerator pedal to tem-
porarily accelerate the vehicle. Releasing the
pedal automatically slows down the vehicle
to the set speed and ACC restarts its control.
To decrease the set speed
By using the “SET -” switch:
NOTE
 There is some time lag until the vehicle
begins decelerating after the set speed has
been changed.
 The set speed can be changed even while
your vehicle is following a vehicle in front
using the ACC. In this case, however,
although the set speed itself is decreased,
your vehicle will not decelerate.
 When the switch is held, a buzzer will sound
every time the set speed changes
By using the brake pedal:
NOTE
NOTE
 The ACC control will not resume after
releasing the brake pedal.
To temporarily accelerate the
vehicle
WARNING
 The ACC braking control and approach
alarm functions will not work while the
accelerator pedal is depressed.
BK0211800US.book 103 ページ ２０１４年３月１２日 水曜日 午後２時４２分