Operation Manual

Adaptive Cruise Control System (ACC) (if so equipped)
5-100 Features and controls
5
When the ACC no longer detects a vehicle in
front, the buzzer will sound, the vehicle sym-
bol in the display will disappear and your
vehicle will slowly accelerate to the set
speed.
N00576900036
While the ACC is activated, if your vehicle is
approaching too closely to the vehicle in
front, the ACC gives a warning by sounding a
buzzer and displaying a message. Apply the
brakes to maintain the appropriate distance to
the vehicle in front.
NOTE
 If the brake pedal is not depressed within 2
seconds after your vehicle has been stopped
by the ACC, a warning buzzer will sound,
the above warning will be shown in the multi
information display to alert the driver, and
the ACC control will be canceled.
 When depressing the brake pedal while the
automatic brake is applied, the brake pedal
will feel firm. This is normal. Depress the
brake pedal harder to apply greater braking
force.
 During the automatic braking, operation
sounds may be heard. This is normal.
WARNING
 Never leave the vehicle while it is being
stopped by the ACC.
WARNING
 Your vehicle may accelerate up to the set
speed in the following situations. Apply
the brake, if necessary, to slow down.
• When your vehicle no longer follows the
vehicle in front, e.g. at a freeway exit or
when your vehicle or the vehicle in front
changes its lane.
• When driving on a curve.
 When the vehicle in front has changed its
course or lane, if a stationary vehicle
appears in front your vehicle, the ACC
will not decelerate your vehicle.
Approach alarm
WARNING
BK0211800US.book 100 ページ ２０１４年３月１２日 水曜日 午後２時４２分