Operation Manual

Adaptive Cruise Control System (ACC) (if so equipped)
Features and controls 5-97
5
N00577100035
While the ACC is turned on, indicators for
the ACC are shown in the multi information
display.
3- “RES +” switch
Used to resume the control function
after cancelling the ACC or the conven-
tional cruise control.
Also used to increase the set speed.
4- “CANCEL” switch
Used to cancel the control function of
the ACC or the cruise control.
5- ACC distance switch
Used to set or change the following dis-
tance between your vehicle and a vehi-
cle in front.
NOTE
 Operate the individual switches correctly and
one after another.
The ACC may be turned off or its control
function may be cancelled if two or more
switches are pressed concurrently
ACC Indicators
1- ACC indicator:
Indicating that the ACC is turned on.
2- Control state indicator:
Indicating that ACC is activated.
3- Set speed indicator:
Indicating the set speed.
If the set speed is not set, “---” is
shown.
4- Front vehicle indicator:
Indicating when the ACC detects a
vehicle ahead.
When a front vehicle is detected while
the ACC is activated, the ‘Active’ front
vehicle indicator shown in the illustra-
tion below will illuminate.
When a front vehicle is detected while
the ACC is not activated or the ACC is
canceled, the ‘Stand by’ front vehicle
indicator will illuminate.
Display
State
Stand by Active
Vehicle in
front detected
5-Following distance indicator:
Indicating the following distance.
Two states: “Stand by” and “Active”
When a front vehicle is detected while
the ACC is activated, the ‘Active’ fol-
lowing distance indicator shown in the
illustration below will illuminate.
When a front vehicle is detected while
the ACC is not activated or the ACC is
canceled, the ‘Stand by’ following dis-
tance indicator will illuminate.
Following
distance set-
ting symbol
State
Stand by Active
Long
Middle
Short
BK0211800US.book 97 ページ ２０１４年３月１２日 水曜日 午後２時４２分