Operation Manual

Cruise control
Features and controls 5-93
5
The “SET” indicator appears on the infor-
mation display in the meter cluster. (For
vehicles equipped with color liquid crys-
tal display meter)
N00518501354
There are 2 ways to increase the set speed.
Push up and hold the RES + switch (C) while
driving at the set speed, and your speed will
then gradually increase.
When you reach your desired speed, release
the switch. Your new cruising speed is now
set.
To increase your speed in small amounts,
push up the RES + switch (C) for less than
about 1 second and release it.
Each time you press the RES + switch (C),
your vehicle will go about 1 mph (1.6 km/h)
faster.
While driving at the set speed, use the accel-
erator pedal to reach your desired speed and
then push down the SET - switch (B) and
release the switch momentarily to set a new
desired cruising speed.
N00518601283
There are 2 ways to decrease the set speed.
Push down and hold the SET - switch (B)
while driving at the set speed, and your speed
will slow down gradually.
When you reach your desired speed, release
the switch. Your new cruising speed is now
set.
NOTE
 When you release the SET - switch (B), the
vehicle speed will be set.
To increase the set speed
RES + switch
Accelerator pedal
To decrease the set speed
SET - switch
BK0211800US.book 93 ページ ２０１４年３月１２日 水曜日 午後２時４２分