Operation Manual

Electronically controlled 4WD system (if so equipped)
5-76 Features and controls
5
N00549401027
Normally the indicator illuminates when the
operation mode put in ON, and then the drive
mode is displayed a few seconds after the
engine is started.
The status of each drive mode display is as
follows.
On vehicles with color liquid crystal display
meter, the drive mode is displayed as an inter-
rupt display on the information screen in the
multi information display when the drive
mode is switched.
After a few seconds, the information screen
returns from the drive mode display to the
previous screen.
Warning display (color liquid crystal display)
Warning display (color liquid crystal display)
Drive mode indicator
Drive Mode
Drive mode indicator
color liquid
crystal dis-
play meter
mono-color
liquid crys-
tal display
meter
4WD ECO 4WD ECO 4WD-E
4WD AUTO 4WD AUTO —
4WD LOCK 4WD LOCK LOCK
Drive mode Display
4WD ECO
4WD AUTO
4WD LOCK
CAUTION
 If the selected drive mode indicator begins
blinking, the drive mode will automatically
switch to protect the drive-system compo-
nents. A warning will also be displayed in
the information screen in the multi informa-
tion display.
Reduce speed and, if the indicator stops
blinking, you may resume normal driving.
For vehicles equipped with mono-color liq-
uid crystal display meter, drive mode indica-
tor (“4WD-E”, “LOCK”) is blinking
alternately
CAUTION
 If the selected drive mode indicator (4WD) is
blinking, a problem has occurred with the
electronically controlled 4WD. A warning
will also be displayed in the information
screen in the multi information display. Have
your vehicle inspected by an authorized Mit-
subishi Motors dealer.
For vehicles equipped with mono-color liq-
uid crystal display meter, drive mode indica-
tor (“4WD-E”, “LOCK”) is blinking at the
same time.
BK0211800US.book 76 ページ ２０１４年３月１２日 水曜日 午後２時４２分