Operation Manual

Theft-alarm system
5-46 Features and controls
5
N00582600025
The alarm can be deactivated in the following
ways.
 By using the keyless entry system or the
F.A.S.T.-key operation to lock or unlock
the doors and liftgate.
 Turn the ignition switch to the “ON” posi-
tion or put the operation mode in ON.
N00582700026
The vehicle inclination detection function and
the interior intrusion detection function can
be deactivated when parking in automated car
parks or leaving pets in the vehicle.
1. Except for vehicles equipped with the
F.A.S.T.-key, remove the key from the
ignition switch.
For vehicles equipped with the F.A.S.T.-
key, put the operation mode in OFF.
2. Raise and hold the wiper and washer
switch to the “MIST” position for about 3
seconds. The buzzer will sound once and
the function will be deactivated.
To activate the function again, raise and hold
the wiper and washer switch to the “MIST”
position for about 3 seconds.
The buzzer will sound twice and the function
will be activated.
N00510501172
The system will be disarmed if the following
operation is performed.
 Except for vehicles equipped with the
F.A.S.T.-key, if the ignition switch is
turned to the “ON” position.
 For vehicles equipped with the F.A.S.T.-
key, if the operation mode is put in ON.
NOTE
 The alarm will continue to operate for 3 min-
utes. At the end of that period, the alarm will
automatically shut off to save battery power.
The system will then be rearmed until the
proper disarming step is taken.
 The alarm will resume if unauthorized
actions are taken again, even if the alarm has
stopped.
Alarm deactivation
Horn or siren sounds!
Headlights blink on and off!
To deactivate the vehicle inclina-
tion detection function and the
interior intrusion detection func-
tion (vehicles equipped with the
interior alarm sensor)
NOTE
 The function will be activated again if the
following operation is performed.
• If the doors and the liftgate are unlocked
using the keyless entry system or the
F.A.S.T.-key operation.
• If the ignition switch is turned to the “ON”
or “ACC” position or the operation mode is
put in ON or ACC.
Disarmed stage
BK0211800US.book 46 ページ ２０１４年３月１２日 水曜日 午後２時４２分