Operation Manual

Power liftgate (if so equipped)
Features and controls 5-39
5
<Using the open switch on the power lift-
gate>
 The power liftgate is unlocked.
 The F.A.S.T.-key is within the operating
range (2.3 feet (70 cm) from the power
liftgate open switch) and the power lift-
gate is locked.
The power liftgate can be closed automati-
cally when all of the following conditions are
met.
<Using the F.A.S.T.-key>
 The operation mode is in OFF.
 The power liftgate is completely open.
 Nothing is touching the auto reverse sen-
sors (A) on the power liftgate.
<Using the driver’s side power liftgate switch
or the close switch on the power liftgate>
 The operation mode is in ON with the
selector lever in the “P” (PARK) position,
or the operation mode is in ACC or OFF.
 The power liftgate is completely open.
 Nothing is touching the auto reverse sen-
sors on the power liftgate.
After unlocking the doors and the power lift-
gate, the power liftgate can be operated by
pressing the switch (A) of the F.A.S.T.-key or
the driver’s side power liftgate switch (B).
<Using the F.A.S.T.-key>
If the power liftgate switch is pressed twice in
a row, the power liftgate operates after the
warning buzzer sounds and the hazard warn-
ing flasher blinks 2 times.
The power liftgate operates as follows:
Operating the power liftgate using
the F.A.S.T.-key or the driver’s
side power liftgate switch
•While closed: The warning buzzer sounds 4
times and the power liftgate
completely opens.
BK0211800US.book 39 ページ ２０１４年３月１２日 水曜日 午後２時４２分