Operation Manual

Door locks
5-32 Features and controls
5
Turn the key toward the front of the vehicle to
lock the door. After checking that the door is
locked, turn the key back to the center and
remove it.
Move the lock knob to the lock position to
lock the door.
All doors should be kept locked while driv-
ing.
The driver’s door can be unlocked without
using the lock knob by pulling on the inside
door handle.
1. Move the inside lock knob to the locked
position.
 When closing a door, make sure that the
door is fully closed and the door-ajar
warning display goes out on the informa-
tion screen on the multi-information dis-
play. If the door is ajar it could open while
driving and cause an accident.
To lock and unlock with the key
(driver’s door)
1- Insert or remove the key
2- Lock
3- Unlock
WARNING
NOTE
 When locking or unlocking with the key,
only the driver’s door will be locked or
unlocked.
To lock or unlock all doors and liftgate, use
the power door lock switch, the keyless entry
system or the F.A.S.T.-key operation.
Refer to “Power door locks” on page 5-33,
“Keyless entry system” on pages 5-7 and
5-28, and “To operate using the F.A.S.T.-
key” on page 5-14.
 In vehicles equipped with the F.A.S.T.-key,
the driver’s door can be locked and unlocked
using the emergency key.
Refer to “Emergency key” on page 5-25.
To lock or unlock the door from
the inside
1- Lock
2- Unlock
To lock the door without using
the key
BK0211800US.book 32 ページ ２０１４年３月１２日 水曜日 午後２時４２分