Operation Manual

Vehicle care precautions
Vehicle care and maintenance 9-39
9
2. Use a screw driver to gently pry up the tab
(B) and remove the lens.
3. Pull the bulb out of the socket.
4. To install the bulb, perform the removal
steps in reverse.
N00943900102
N00945100166
In order to maintain the value of your vehicle,
perform regular maintenance using the proper
materials and procedures. Be sure to use only
those materials and procedures that meet your
local environmental pollution control regula-
tions. Choose the materials you will use care-
fully, to be sure that they do not contain
corrosives. If you are not sure, contact an
authorized Mitsubishi Motors dealer for help
in choosing these materials.
NOTE
 Wrap a cloth around the tip of the screw-
driver to keep from scratching the lens.
NOTE
 When mounting the light unit, insert tab (C)
first then align tab (D) with its hole.
High-mounted stop light
NOTE
 The high-mounted stop light uses an LED
instead of the bulb. Check with an authorized
Mitsubishi Motors dealer or a repair facility
of your choice when the light needs to be
repaired or replaced.
Vehicle care precautions
CAUTION
 Cleaning products can be dangerous. Some
are poisonous and others are highly flamma-
ble. Some are dangerous if you breathe their
fumes in a closed space. When you use any-
thing in a container to clean your vehicle, be
sure to follow the instructions. Always open
your vehicle doors or windows when you’re
cleaning the inside. Never use the following
chemicals to clean your vehicle:
• Gasoline
• Carbon Tetrachloride
• Benzine
• Kerosene
• Naphtha
• Acetone
• Turpentine
• Paint Thinner
• Lacquer Thinner
BK0200500US.book 39 ページ ２０１３年２月１２日 火曜日 午前９時４６分