Operation Manual

Replacement of light bulbs
9-38 Vehicle care and maintenance
9
N00929101064
1. Push the light unit toward the center of the
vehicle body to remove it.
2. Turn the socket (A) counterclockwise to
remove it, and then pull the bulb out of
the socket.
3. To install the bulb, perform the removal
steps in reverse.
N00944000360
1. When removing the light unit (A), push it
toward the left side of the vehicle body.
NOTE
 When mounting the light unit, align the
notch (F) and pin (G) on the light unit with
the clip (H) and hole (I) in the body.
Back-up lights
NOTE
 Wrap a cloth around the tip of the screw-
driver to keep from scratching the lens.
NOTE
 When installing the light unit, first insert the
notch (B) into the hole on the body, and then
push on the light unit to fit it into place.
License plate lights
BK0200500US.book 38 ページ ２０１３年２月１２日 火曜日 午前９時４６分