Operation Manual

Replacement of light bulbs
9-36 Vehicle care and maintenance
9
N00943401380
1. Turn the socket (A) counterclockwise to
remove it, then remove the bulb from the
socket by turning it counterclockwise
while pressing in.
2. To install the bulb, perform the removal
steps in reverse.
N00943501147
N00943601773
1. Insert a straight blade (or minus) screw-
driver with a cloth over its tip at the edge
of the cover (A) and pry gently to remove
the cover.
2. Remove the 3 screws (B) and remove the
light unit.
Front turn signal lights
*: Front of the vehicle
Side turn signal lights (if so
equipped)
NOTE
 The side turn signal lights uses an LED
instead of the bulb.
Check with an authorized Mitsubishi Motors
dealer or a repair facility of your choice
when the light needs to be repaired or
replaced.
Front fog lights (if so
equipped)/Daytime running
lights (if so equipped)
NOTE
 When unfastening the screws or the fog
light, be careful not to move the beam posi-
tion adjustment screw (C).
BK0200500US.book 36 ページ ２０１３年２月１２日 火曜日 午前９時４６分