Operation Manual

Making a cargo area
4-14 Seat and restraint systems
4
8. Put the head restraint on the hook (D)
with their front faces facing upward until
it locks into place.
1. Remove the head restraint from the hook.
2. Raise the seatback until it locks securely
into place.
3. On vehicles with the third row seats,
make sure that the lever is in the walk-in
mode position.
Otherwise, move the lever to the walk-in
mode position.
4. While lifting the seat belt buckle (A), gen-
tly lower the seat cushion. Make sure that
there is a hook (B) at the position shown
in the illustration.
CAUTION
 Do not allow any person to sit on the flipped
seat cushion, and do not place luggage on it.
The seat’s mounting fittings could bend
under the weight, making it impossible for
the seat cushion to be secured when it returns
to the original position.
NOTE
 When folding the second row seatback for-
ward once, the seat will automatically switch
from the luggage area mode to the walk-in
mode.
To return
NOTE
 A rubber strap (C) is attached to the seat belt
buckle for the left outboard seating position.
This helps raise the seat belt buckle while the
seat cushion returns to the original position.
BK0200500US.book 14 ページ ２０１３年２月１２日 火曜日 午前９時４６分