Operation Manual

Fusible links
Vehicle care and maintenance 9-25
9
the windshield, side and rear window are also
useful.
N00942700291
The fusible links will melt to prevent a fire if
a large current attempts to flow through cer-
tain electrical systems.
In case of a melted fusible link, see your
authorized Mitsubishi Motors dealer or a
repair facility of your choice for inspection
and replacement.
For the fusible links, please refer to “Fuse
load capacities” on page 9-25.
N00942801912
To prevent damage to the electrical system
from short-circuiting or overloading, each
individual circuit is equipped with a fuse. The
fuse blocks are located in the passenger com-
partment and in the engine compartment.
The fuse blocks in the passenger compart-
ment are located behind the fuse lid in front
of the driver’s seat at the position shown in
the illustration.
Pull the fuse lid to remove it.
In the engine compartment, the fuse block is
located as shown in the illustration. While
pressing the tab (A), pull up the cover (B).
N00954801283
This fuse list shows the names of the electri-
cal systems and their fuse capacities.
There are spare fuses in the fuse block cover
in the engine compartment. Always replace a
blown fuse with one of the same capacity as
the original.
Fusible links
WARNING
 Fusible links must not be replaced by any
other device. Failing to fit the correct fus-
ible link may result in fire in the vehicle,
property destruction and serious or fatal
injuries at any time.
Fuses
Fuse block location
Passenger compartment
A- Main fuse block
B- Sub fuse block
Engine compartment
Fuse load capacities
BK0200500US.book 25 ページ ２０１３年２月１２日 火曜日 午前９時４６分