Operation Manual

Making a cargo area
Seat and restraint systems 4-13
4
1. Remove the head restraints from the sec-
ond row outside seating position.
Lower the head restraint for second row
middle seating position to its lowest posi-
tion.
Refer to “Head restraints” on page 4-10.
2. When the left side second row seat is
folded, store the seat belt for the middle
seating position of the second row seat.
Refer to “Detachable center seat belt for
second row” on page 4-20.
3. On vehicles with the second row seat slide
function, move the second row seat fully
backward.
Refer to “To adjust the seat forward or
backward” on page 4-8.
4. Lift the front end of the seat cushion.
5. Flip the seat cushion forward. On vehicles
with the third row seats, move the lever
(A) to the luggage area mode position.
6. Fold forward the seat belt buckle.
7. Pull up the lever (C), then fold the seat-
back forward.
NOTE
 You can separately fold the right and left side
of the second row seat.
To fold the second row seat
NOTE
 If you do not move the second row seat fully
backward, you may not be able to fold the
second row seat.
CAUTION
 Do not allow any person to get on the plastic
cover (B), and do not place luggage on it.
Doing so could damage the plastic cover.
BK0200500US.book 13 ページ ２０１３年２月１２日 火曜日 午前９時４６分