Operation Manual

Towing
8-14 For emergencies
8
1. Align the tire air valve (C) and the wheel
cover notch (D).
2. Push the bottom (F) of the wheel cover
into the wheel.
3. Gently push in both sides (G) of the wheel
cover and hold them in place with both
knees.
4. Gently tap the top (H) of the wheel cover
around its outer circumference to push it
in.
N00837001898
If towing is necessary, we recommend you to
have it done by a commercial tow truck ser-
vice.
When towing is required, transport the vehi-
cle using a tow truck.
Incorect towing equipment could damage
your vehicle.
NOTE
 The wheel cover is made of plastic. Be care-
ful when prying it off.
CAUTION
 Trying to remove the wheel cover with only
your bare hands can seriously injure your
fingers.
To install
CAUTION
 Before installing the wheel cover to the
wheel, make sure that the tabs (A) on the
back of the wheel cover correctly engage the
ring (B) to prevent the wheel cover from
coming off. Do not install a wheel cover that
has broken tabs.
NOTE
 The back of the cover has a symbol (E) that
shows the position of the notch.
Towing
If your vehicle needs to be
towed
BK0200500US.book 14 ページ ２０１３年２月１２日 火曜日 午前９時４６分