Operation Manual

Automatic climate control air conditioner
7-12 Comfort controls
7
N00703601027
Push the switch to turn off the air condition-
ing system.
N00731701371
In normal conditions, use the system in the
AUTO mode and follow these procedures:
1. Push the AUTO switch.
2. Set the temperature control switch to the
desired temperature. The temperature can
be set within a range of around 61 to 89
(when the outside temperature unit of the
multi-information display shows °F) or 17
to 31 (when the outside temperature unit
of the multi-information display shows
°C).
The vents (except for “ ”), recircula-
tion/outside air, blower speed, temperature
adjustment, and ON/OFF of air conditioner
will be controlled automatically.
N00731801125
Blower speed and vent mode may be con-
trolled manually by setting the blower speed
selection switch and the MODE switch to the
desired positions. To return to automatic
operation, press the AUTO switch.
OFF switch
Operating the air conditioning
system (automatic mode)
NOTE
 Set the temperature at about 75 (when the
outside temperature unit of the multi-infor-
mation display shows °F) or 24 (when the
outside temperature unit of the multi-infor-
mation display shows °C) under normal con-
ditions.
 When the engine coolant temperature is low,
the air temperature from the heater will be
cool/cold until the engine warms up, even if
you have selected warm air with the temper-
ature switch. To prevent the windshield and
windows from fogging up, the vent mode
will be changed to “ ” and the blower
speed will be reduced.
Operating the air conditioning
system (manual mode)
BK0200500US.book 12 ページ ２０１３年２月１２日 火曜日 午前９時４６分