Operation Manual

USB input terminal (if so equipped)
5-208 Features and controls
5
N00566901102
1. Park your vehicle in a safe place and turn
the ignition switch to the “LOCK” posi-
tion or put the operation mode in OFF.
2. Open the USB input terminal cover (A) in
the floor console box.
3. Connect the Dock connector (C) to the
iPod (B).
4. Connect the Dock connector (C) to the
USB input terminal (D).
5. To remove the Dock connector, turn the
ignition switch to the “LOCK” position or
put the operation mode in OFF first and
perform the installation steps in reverse.
N00567000015
N00567101127
Devices of the following types can be con-
nected.
How to connect an iPod
NOTE
 Use a genuine Dock connector from Apple
Inc.
CAUTION
 Keep the lid of the floor console box closed
while driving the vehicle. A lid or the con-
tents of the floor console box could other-
wise cause injuries.
NOTE
 When closing the floor console box, be care-
ful not to trap the connector cable.
Types of connectable devices
and supported file specifica-
tions
Device types
Model name Condition
USB memory device
Storage capac-
ity of 256
Mbytes or more
iPod*
fifth gener-
ation
F/W Ver.1.3 or
later
iPod classic*
80GB/180
GB
F/W Ver.1.1.2
or later
120GB
F/W Ver.2.0.1
or later
160GB
(late 2009)
F/W Ver.2.0.4
or later
BK0200500US.book 208 ページ ２０１３年２月１２日 火曜日 午前９時４６分