Operation Manual

Wiper and washer switch
Features and controls 5-179
5
N00523001676
The windshield wiper and washer can be
operated with the ignition switch or the oper-
ation mode is in ON or ACC.
If the blades are frozen to the windshield, do
not operate the wipers until the ice has melted
and the blades are freed, otherwise the wiper
motor may be damaged.
With the lever in the “INT” (speed sensitive
intermittent operation) position, the intermit-
tent intervals can be adjusted by turning the
knob (A).
The misting function can be used when the
ignition switch or the operation mode is in
ON or ACC.
The wipers will operate once if the wiper
lever is raised to the “MIST” position and
Wiper and washer switch
CAUTION
 If the washer is used in cold weather, the
washer fluid sprayed against the glass may
freeze, which may hinder visibility. Warm
the glass with the defroster before using the
washer.
Windshield wipers
NOTE
 To ensure a clear rearward view, the rear
window wiper will automatically perform
several continuous operations if the selector
lever is put in the “R” position while the
windshield wipers are operating.
Refer to “Rear window wiper and washer”
on page 5-183.
Except for vehicle with rain sensor
MIST- Misting function
The wipers will operate once.
OFF- Off
INT- Intermittent (Speed sensitive)
LO- Slow
HI- Fast
To adjust intermittent intervals
1- Fast
2- Slow
NOTE
 The speed-sensitive-operation function of
the windshield wipers can be deactivated.
For further information, please contact your
authorized MITSUBISHI MOTORS dealer
or a repair facility of your choice. On vehi-
cles equipped with Mitsubishi Multi-Com-
munication System, screen operations can be
used to make the adjustment.
Refer to separate owner’s manual for details.
Misting function
BK0200500US.book 179 ページ ２０１３年２月１２日 火曜日 午前９時４６分