Operation Manual

Combination headlights and dimmer switch
Features and controls 5-173
5
N00532601580
 If the following operation is performed
with the combination headlights and dim-
mer switch in the “ ” or “ ” position,
the lights automatically turn off.
[Except for vehicles equipped with the
F.A.S.T.-key]
The ignition switch is turned to the “OFF”
or “ACC” position or the key is removed
from the ignition switch and the driver’s
door is opened.
[For vehicles equipped with the F.A.S.T.-
key]
The operation mode is changed to OFF or
ACC and the driver’s door is opened.
NOTE
 The sensitivity of the automatic on/off con-
trol can be adjusted.
For further information, please contact your
authorized Mitsubishi Motors dealer or a
repair facility of your choice.
On vehicles equipped with Mitsubishi Multi-
Communication System, screen operations
can be used to make the adjustment.
Refer to the separate owner’s manual for
details.
 Do not place anything on the automatic light
sensor (A), and do not clean with a glass
cleaner.
NOTE
 Do not cover the sensor (A) for the automatic
on/off control by affixing a sticker or label to
the windshield.
NOTE
 If the lights do not turn on or off with the
switch in the “AUTO” position, manually
operate the switch. Have the system checked
by an authorized Mitsubishi Motors dealer or
a repair facility of your choice.
Light auto-cutout function
(headlights and other lights)
BK0200500US.book 173 ページ ２０１３年２月１２日 火曜日 午前９時４６分