Operation Manual

Multi Information display - Type 2
Features and controls 5-147
5
N00557101179
The fuel consumption display unit can be
changed. The distance and amount units are
also switched to match the selected fuel con-
sumption unit.
1. When you lightly press the multi informa-
tion display switch a few times, the infor-
mation display switches to the average
fuel consumption display.
Refer to “Information display” on page
5-141.
2. Press and hold the multi information dis-
play switch for about 5 seconds or more
until buzzer sound is heard twice.
3. Press and hold the multi information dis-
play switch to switch in sequence from
“km/L”  “L/100 km”  “mpg” 
“km/L”.
The distance units is also changed in the fol-
lowing combinations to match the selected
fuel consumption unit.
N00557201167
The temperature display unit can be switched.
1. When you lightly press the multi informa-
tion display switch a few times, the infor-
mation display switches to the outside
temperature display.
Refer to “Information display” on page
5-141.
2. Each time you press the multi information
display switch for 2 seconds or more on
outside temperature display, you can
switch from °F to °C or from °C to °F unit
of outside temperature display.
Changing the fuel consumption
display unit
NOTE
 The display units for the driving range, the
average fuel consumption are changed, but
the units for the indicating needle (speedom-
eter), the odometer, the trip odometer and the
service reminder will remain unchanged.
 If the battery is disconnected, the memory of
the unit setting is erased and it returns auto-
matically to factory setting.
Fuel
consumption
Distance
(driving range)
km/L km
L/100 km km
mpg mile (s)
Changing the temperature unit
NOTE
 The temperature value on air conditioner
panel is switched in conjunction with outside
temperature display unit of the multi infor-
mation display.
However, “°F” or “°C” are not shown to tem-
perature display of an air conditioner.
 On vehicles equipped with Mitsubishi Multi-
Communication System, the temperature
value of the air conditioner screen of Mit-
subishi Multi-Communication System is
switched in conjunction with outside temper-
ature display unit of the multi information
display.
However, “°F” or “°C” are not shown to the
air conditioner screen.
BK0200500US.book 147 ページ ２０１３年２月１２日 火曜日 午前９時４６分