Operation Manual

Adaptive Cruise Control System (ACC) (if so equipped)
5-106 Features and controls
5
N00581900021
With the ACC turned on, the distance
between your vehicle and a vehicle ahead can
be selected from three levels by pushing the
ACC distance switch. Each time the ACC
distance switch is pushed, the following dis-
tance will change from “Long” to “Middle”,
to “Short”, and return to “Long” again.Every
time the ACC is turned to ON, the following
distance is reset to “Long”.
The following distance indicator shows the
level of the following distance:
“Long”
“Middle”
“Short”
N00582000029
Press and hold the “ACC ON/OFF” switch
while the operation mode is in the “ON” posi-
tion. A buzzer will sound and the multi infor-
mation display will show the following
indicator.
The conventional cruise control is turned off
when the operation mode is tuned off.
For operation of the cruise control, refer to
“Cruise control” on page 5-92.
N00582100020
FCC ID:OAYARS3-B (for vehicles sold in
the U.S.A)
IC: 4135A-ARS3B (for vehicles sold in the
Canada)
This device complies with Part 15 of FCC
Rules and Industry Canada licence-exempt
RSS standard(s).
Operation is subject to the following two con-
ditions.
 this device may not cause harmful inter-
ference.
 this device must accept any interference
received, including interference that may
cause undesired operation.
To change the following dis-
tance
NOTE
 Actual distance will vary depending on your
vehicle speed and the front vehicle speed.
The distance will become longer when the
vehicle speeds are higher.
To activate conventional cruise
control
NOTE
 The conventional cruise control does not
sound or display the approach alarm, will not
adjust your vehicle speed, and does not con-
trol the distance between your vehicle and a
vehicle in front.
General information
CAUTION
 Changes or modifications not expressly
approved by the manufacturer for compli-
ance could void the user’s authority to oper-
ate the equipment.
BK0200500US.book 106 ページ ２０１３年２月１２日 火曜日 午前９時４６分