Operation Manual

Adaptive Cruise Control System (ACC) (if so equipped)
5-102 Features and controls
5
N00581500027
There are two ways to increase the set speed.
The set speed will increase by 1 mph (1
km/h) every time you push up the “RES +”
switch while the ACC is activated. If you
hold the switch pushed up, the set speed
increases in 5 mph (5 km/h) increments.
When the accelerator pedal is depressed
while driving with the ACC control working,
you can accelerate the vehicle beyond the
presently set speed.
When the vehicle speed reaches your desired
speed, push down and release the “SET -”
switch and release the accelerator pedal; the
new speed is then set in the system.
• On winding roads.
• On slippery roads, such as icy or snow-
covered roads.
• In adverse weather conditions, such as
rain, snow or fog.
• On steep downslopes.
• When the inclination of a road fre-
quently changes.
• When the approach alarm frequently
sounds.
• When your vehicle is towed or is towing
another vehicle.
• When your vehicle is on a chassis dyna-
mometer or free rollers.
• When tire inflation pressures are not
adequate.
• When the temporary spare tire is being
used.
• When the radar sensor and/or its sur-
rounding area are damaged or deformed.
CAUTION
 To maintain proper performance of the ACC:
• Always clean the surface of the radar sen-
sor.
• Avoid impacting the radar sensor or its sur-
rounding area.
• Do not put a sticker on the radar sensor or
its surrounding area.
• Do not paint the radar sensor.
• Do not install a grill guard.
WARNING
• Do not modify the radar sensor or its sur-
rounding area.
• Always use tires of the same size, same
type, and same brand, and which have no
significant wear differences.
• Do not modify the vehicle’s suspension.
To increase the set speed
By using the “RES +” switch:
CAUTION
NOTE
 There is some time lag until the vehicle
begins accelerating to the new set speed after
the set speed has been changed.
 The set speed can be changed even while
your vehicle is following a vehicle in front
using the ACC. In this case, however,
although the set speed itself is increased,
your vehicle will not accelerate.
 When the switch is held, a buzzer will sound
every time the set speed changes
By using the accelerator pedal:
BK0200500US.book 102 ページ ２０１３年２月１２日 火曜日 午前９時４６分