Operation Manual

Electronically controlled 4WD system (if so equipped)
Features and controls 5-77
5
Warning display (color liquid crystal display)
Warning display (color liquid crystal display)
N00576600020
While the drive mode is in the “4WD AUTO”
position, if the ECO mode switch is switched
ON, the drive mode will be changed to “4WD
ECO” mode.
If the ECO mode switch is switched OFF, the
drive mode will be returned to “4WD AUTO”
mode.
Refer to the “ECO mode switch” on page
5-178.
Drive mode Display
4WD ECO
4WD AUTO
4WD LOCK
CAUTION
 If the selected drive mode indicator begins
blinking, the drive mode will automatically
switch to protect the drive-system compo-
nents. A warning will also be displayed in
the information screen in the multi informa-
tion display.
Reduce speed and, if the indicator stops
blinking, you may resume normal driving.
For vehicles equipped with mono-color liq-
uid crystal display meter, drive mode indica-
tor (“4WD-E”, “LOCK”) is blinking
alternately
CAUTION
 If the selected drive mode indicator (4WD) is
blinking, a problem has occurred with the
electronically controlled 4WD. A warning
will also be displayed in the information
screen in the multi information display. Have
your vehicle inspected by an authorized Mit-
subishi Motors dealer.
For vehicles equipped with mono-color liq-
uid crystal display meter, drive mode indica-
tor (“4WD-E”, “LOCK”) is blinking at the
same time.
CAUTION
 Make sure that all four tires are the same
specified size, type, and brand, and have no
significant difference in the amount of wear.
Otherwise, the electronically controlled
4WD system may not work properly, and the
4WD system warning (overheating or ser-
vice required) may displayed.
When the ECO mode switch is
ON
NOTE
 If the drive mode is switched in any mode
after the drive mode is switched in “4WD
ECO”, the drive mode will not be changed
even if the ECO mode switch is switched
OFF.
BK0200500US.book 77 ページ ２０１３年２月１２日 火曜日 午前９時４６分