Operation Manual

Continuously variable transmission (CVT) (if so equipped)
5-70 Features and controls
5
3. Insert a screwdriver with a cloth over its
tip into the notch (A) of the cover. Pry
gently as shown to remove the cover.
4. Depress the brake pedal with the right
foot.
5. Insert a screwdriver in the shift-lock
release hole (B). Shift the selector lever to
the “N” (NEUTRAL) position while
pressing the screwdriver down.
N00560401088
When the ignition switch is turned to the
“ON” position or the operation mode is put in
ON, the selector lever position is shown on
the multi-information display.
N00560501047
[For vehicles equipped mono-color liquid
crystal display meter]
When the selector lever position indicator
blinks while you are driving, there could be a
malfunction in the automatic transmission
system or CVT fluid temperature becomes
abnormally high.
Selector lever position display
Warning display
When the selector lever position
indicator blinks
Type 1 Type 2
NOTE
 “A” indicator blinks only if the CVT posi-
tional switch is broken.
It does not indicate in normal driving condi-
tion.
BK0200500US.book 70 ページ ２０１３年２月１２日 火曜日 午前９時４６分