Operation Manual

Automatic transaxle (if so equipped)
Features and controls 5-63
5
system or A/T fluid temperature becomes
abnormally high.
[For vehicles equipped with color liquid
crystal display meter]
or
When the warning display or the warn-
ing display appears on the information screen
in the multi-information display while you
are driving, there could be a malfunction in
the automatic transaxle.
NOTE
 “A” indicator does brink only the condition
that the A/T positional switch is broken.
It does not indicate in normal driving condi-
tion.
CAUTION
 If a malfunction occurs in the A/T while
driving, the indicator will brink.
In this case, immediately park your vehicle
in a safe place and follow these procedures:
[If the indicator blinks rapidly (once per sec-
ond), the A/T fluid is overheating.]
Park your vehicle in a safe place but do not
turn off the engine. Move the selector lever
to the “P” (PARK) position and open the
bonnet. Keep the engine, idling.
After a while, move the selector lever into
any position other than “P” (PARK) position
and confirm that the indicator stops blinking.
It is safe to continue driving if the indicator
no longer blinks.
If the indicator continues blinking or blinks
intermittently, have your vehicle inspected
by an authorised Mitsubishi Motors dealer.
[If the indicator blinks slowly (once per 2
seconds), the A/T safety device may be oper-
ating due to a malfunction.]
Have the vehicle inspected by an authorised
Mitsubishi Motors dealer as soon as possi-
ble.
BK0200500US.book 63 ページ ２０１３年２月１２日 火曜日 午前９時４６分